Short answer. Organising a warehouse comes down to four decisions, in this order. Give every location an address: aisle, bay, level, a label to scan. Give every item one picking location, and only one. Move the items that leave most often closer to the dock, based on what really goes out. Have every gesture confirmed by a scan, at put-away as at picking. Warehouse software, often called a WMS, is what holds those four decisions every day. In this page's example, the same order goes from 192 m to 120 m of walking, and 1,000 picked lines from 20 errors to 3.
This page is for those who run the depot of a wholesaler, a distributor, an importer, an online shop or a factory, from a few aisles to a few thousand square metres, and for those who own one in Algeria and follow it from France. The definitions come from public sources: warehouse management system, order picking, picking methods, ABC analysis, cycle counting, cross-docking, barcode, stock keeping unit. The four-aisle depot, its distances and its error rates are a constructed example. The page covers neither safety rules for buildings and storage nor the driving of handling equipment, and quotes no hardware price.
The journey of goods through the depot
The figure follows goods in six steps.
Receiving. A loading dock is the area of a building where goods vehicles are loaded and unloaded; that is where stock comes in, with its note, its quantities, its condition. The detailed check is that of receiving control. Put-away. It is the accented step. The software proposes an address, the person sets the goods down there and scans the location label: the stock now has a “where”. Without that gesture, it is in the depot and nowhere. Picking. Order picking consists of taking and collecting items, in a specified quantity, before shipment, to fulfil customer orders.
Four ways of picking. By the piece: items are taken one by one. By zone: each person picks only in their own. By batch: the items of several orders are collected in one pass. By wave: the combination of the previous two. For a depot of four people, picking order by order, or in small batches of orders, is enough; the choice is revisited when volume doubles. Packing and shipping. The parcel is checked, labelled from the software, see label printing, then loaded in the reverse order of the round, see delivery rounds. Without storage. Cross-docking moves goods directly from the inbound truck to the outbound truck, removing storage and picking: useful for what is already sold on arrival.
«Without that gesture, the stock is in the depot and nowhere.»
Six rules of an organised depot
The figure gives six rules, what each avoids, and how the software holds it.
The address. Three or four elements are enough: zone, aisle, bay, level. “B-07-2” can be read by someone who arrived yesterday. The label carries a barcode, that is a way of representing data in a visual, machine-readable form: it is scanned, not copied out. One picking location. Each item has one address where it is taken, always the same; the surplus goes to reserve, above or at the back, and comes down when the location empties. That is what ends the same item in four places. The unit. A stock keeping unit is a distinct type of item tracked in inventory; the carton of twelve and the single piece are two units, not one.
Look-alike references. The 10 mm screw and the 12 mm one, the same product in two flavours: stored side by side, they will be confused. They are kept apart, and the scan of the item does the rest. Nothing without an address. The pallet set down in the aisle “for now” is entitled to an address too: a waiting zone, visible, where nothing stays more than two days. The oldest first. For products that carry a date, the software proposes the address and the lot to take out, as in traceability by lot. Pallet racks. A pallet rack is a storage system designed to store goods on pallets; permitted loads and the safety of installations are matters for their maker and for regulation, not for this page.
Bringing what leaves most closer to the dock
The figure picks the same order in the same depot, stored in two ways.
ABC analysis. It is a technique that sorts inventory into three categories. The usual example: 20% of items account for 70% of the value consumed in the year, 30% for 25%, and the remaining half for 5%. To arrange a depot, the same logic is applied to the number of order lines: which items come back most often on picking lists. What that changes. On the plan, the six-line order takes 192 m when items are stored wherever there was room, and 120 m when the busiest ones are at the mouth of the first two aisles. At 80 orders a day, 15.4 km against 9.6.
The limits of the plan. The distances come from a simplified plan, four aisles and a there-and-back in each; your depot will give other figures, calculated on what really goes out. Recalculating. The ranking is not done once and for all: the season changes the everyday items. Each month the software proposes a short list of moves, ten or twenty, not a house move. The order of the list. The picking list is sorted in route order, not in order of the customer's order: it requires moving no item, and it is often the first gain. Height. Everyday items at hand height, heavy ones at the bottom, rare ones at the top: the same logic, vertically. Stock. Bringing an item closer is useless if it is missing: the level of the picking location is followed like a small internal replenishment, from the reserve to the front.
What warehouse software holds
The figure stacks five layers; the second is the difference from stock software.
The definition. A warehouse management system is a set of policies and processes meant to organise the work of a warehouse or distribution centre. Its core function is to record the arrival and departure of inventory; it also records the precise location of stock within the warehouse, to make better use of space. What that adds. Sales software knows 340 cartons are left; warehouse software knows 40 are in B-07-1 and 300 in reserve at R-12-4. The movement base is the one described in accurate stock; the location is added to it as one more dimension.
On a phone. The put-away and picking screens fit on a phone or a handheld terminal: one line at a time, the address in large type, a scan to confirm. In a depot the network has dead zones: the application has to keep going and synchronise afterwards, see the offline application. The orders. They arrive by themselves in the picking queue from sales, the website or the customers' ordering portal, with a cut-off time. Stock counts. A cycle count consists of counting a small, specific subset of inventory; most methods rely on ABC ranking to count some items more often. With addresses, counting an aisle takes an hour, not a weekend.
Picking errors, and what stops them
The figure picks the same 1,000 lines from a sheet, then with a scan.
Three errors. The wrong item, almost always a neighbouring reference; the wrong quantity; the forgotten line. In the example, 20 errors in 1,000 lines picked from a sheet: all of them leave, because nothing stops them between the shelf and the truck. What the scan stops. On each line, two scans: the address, then the item. A wrong address or a wrong code refuses the line; a line not done prevents the order from being closed. The 9 wrong items and the 4 omissions disappear; 3 quantity errors remain.
Quantities. They resist, because the scan confirms the item, not the number. Three countermeasures: pick in full cartons where possible; have the quantity taken typed in rather than displayed; weigh the finished parcel and compare it with the expected weight. What an error costs. It is not just the piece: a return, a second delivery, a credit note, a customer who now checks everything. Measure it in your depot: returns for picking errors, over a month, set against lines picked. Training. With addresses and a sorted list, a new hire picks alone much sooner: the knowledge is no longer in the head of the longest-serving person. A criterion. Picking accuracy is part of what is looked at when judging how orders are fulfilled.
«The scan makes nobody more attentive: it makes the error impossible to confirm.»
Seven weeks, in the example
Seven weeks for a depot of a few aisles, without stopping activity.
- What management receives: a plan of the depot with one address per location; stock by location; items ranked by what goes out; picking lists in route order; a scan at each put-away and each pick; errors and lines per hour, week after week.
- What the depot no longer does: look for an item only one person can find, store wherever there is room, cross the depot for everyday items, deliver the neighbouring reference, close for two days for the stock count.
- What is measured: lines picked per hour; distance or time per order; errors per thousand lines, by type; items without an address; pallets in the waiting zone for more than two days; count gaps per aisle.
- What Symloop does: the survey in the depot, the plan and the addresses, the labels, the ranking from your outbound lines, the receiving, put-away and picking screens, offline included, the link with your sales software, then the first review with the team.
The survey. One week in the depot: the real plan, the item families, a month of outbound lines, the known errors. Addressing. It is done aisle by aisle, while the depot runs; each labelled aisle is counted at once and its stock attached to the addresses. Ranking. Everyday items are moved closer in small batches, in the evening. The scan. Receiving and put-away first, then picking, one team at a time.
What remains afterwards. A plan of the depot, stock by location, lists sorted in route order, errors counted, cycle counts. Off the shelf or custom. Warehouse software exists, from the simplest to the most complete; the large systems are made for large sites. For a depot of a few people, what is needed above all is four screens, receiving, put-away, picking, counting, tied to your sales software. Custom work is justified when that link does not exist, or when your business has its rules: lots, dates, cartons and pieces, several depots. The durations are those of a constructed example.
- How do you organise a storage warehouse?
- In this order: an address for every location, one picking location per item, the busiest items near the dock, and a scan to confirm each put-away and each pick. The rest follows.
- Do we need warehouse management software?
- As soon as stock has to be found without the person who stored it. Stock software says how many are left; warehouse software says where. For a small depot, four screens are enough: receiving, put-away, picking, counting.
- What is a WMS?
- A warehouse management system: it records arrivals and departures, and the precise location of each stock. It proposes where to store, in what order to pick, and has each gesture confirmed by a scan.
- How do you address locations?
- By zone, aisle, bay and level, with a barcode label on each location. The address must be readable by someone who arrived the day before: short, logical, increasing in the direction of walking.
- How do you avoid picking errors?
- By having the address then the item scanned on each line: the wrong reference is refused, the forgotten line prevents the order from being closed. For quantities: full cartons, quantity typed in, weight check.
- How do you reduce walking in the depot?
- By moving the items that come back most on orders closer to the dock, and sorting the picking list in route order. In the example, the same order goes from 192 m to 120 m.
- What is ABC ranking?
- A sorting of inventory into three categories. For storage, items are ranked by number of order lines: a few make up most of the picks, and those are placed at the mouth of the aisles.
- How do you count stock without closing the depot?
- With cycle counts: one aisle or one family counted at a time, everyday items more often than the others. With addresses and a scan, the gap is corrected on the spot, location by location.
- Can the depot be organised without stopping activity?
- Yes: addressing is done aisle by aisle, each one counted along the way, and items are moved in small batches. Scanning is introduced at receiving first, then at picking.
- How long does it take to organise a warehouse?
- Seven weeks in this page's example, for a depot of a few aisles, survey included, up to a first measurement of errors and lines per hour.