Food manufacturing software in Algeria (2027): two days to find one lot, a yield that falls without anyone knowing where, check sheets on paper; traceability, mass balance, quality, and what we put in place

“We make canned food. A supplier reports a defect on a lot of raw material, and it takes us two days of notebooks to find out which products it went into and which customers they went to. Yield has been falling for a month and nobody knows on which line. Check sheets are filled in on paper, sometimes the next day. Is there software for the food industry?” A food plant stands on one link: the one that ties each lot of material to each lot of product. Taken at the weighing, it gives the recall, the yield and the proof.

Symloop13 min read
Food manufacturing software from the raw lot to the palletLot traceability in both directions, mass balance, checks at critical points, dates, recallFOOD INDUSTRY SOFTWARE · ALGERIA · 2027Food manufacturing softwarefrom the raw lot to the palletLot traceability in both directions, mass balance, checks atcritical points, dates, recallTWO DAYS OF NOTEBOOKSto find one lotONE SCREENeight pallets, five customerssymloop.com

Short answer. Food manufacturing software holds five things: the recipes, versioned; the lots, from raw material to finished product, linked to one another; production, order by order, with what went in and what came out; quality, measurement by measurement; stock and shipping, with expiry dates. Everything rests on one gesture: scanning the lot of material at the moment of weighing. That link gives three answers that notebooks do not give in time: where did this lot go, in both directions; how much material became product, lot by lot; did this lot pass its checks, and who measured it.

This page is for the manager or production lead of a cannery, a dairy, a biscuit plant, a beverage unit or any food manufacturing business, and for the founder based in France who owns a unit in Algeria and wants to read its production from afar. The definitions come from public sources: traceability, lot number, product recall, hazard analysis and critical control points, shelf life, process manufacturing, mass balance, manufacturing execution system, allergens. The cannery, its lots and its yields are a constructed example. The page does not say what regulation requires of your business: that is for your quality manager. It quotes no hardware price.

What food manufacturing software must hold

The figure stacks five layers; the second carries all the others.

Figure 1 · Five layers. The accented layer is the lots: it is the link between a lot of material and a lot of product, taken at each weighing, that makes everything else possible: the recall, the balance, the proof.

Manufacturing by recipe. Process manufacturing is a branch of manufacturing that is associated with formulas and manufacturing recipes, as opposed to the assembly of discrete units. Once the product is made, it cannot be broken down to its original ingredients: the only memory of what it contains is what was noted at the moment it was made. The lot. A lot number is an identification number assigned to a particular quantity of material from a single manufacturer. It enables tracing of the ingredients, quality control checks, and recall information for subsets of production. The whole software is built around it.

ERP, MES: what are we talking about? An ERP brings the company's main processes together around a shared database. A manufacturing execution system, often called MES, tracks and documents the transformation of raw materials to finished goods; this can be especially important in regulated industries, such as food and beverage. For a mid-sized unit, the question is not the acronym: it is whether the software links the lots, at the weighing, on the line. What this page does not cover. The cost of a manufactured product is detailed in what a finished product costs; the schedule of the lines, in production planning.

01

From the raw lot to the pallet, in six steps

The figure follows the material, from reception to shipping.

Figure 2 · Six steps. The accented step is weighing: it is the moment a lot of material enters a production lot. If the link is not taken there, with one scan, it can no longer be reconstructed.

Reception. Each delivery receives the supplier's lot and an internal label; it is checked, then released or put in quarantine, as in the check at reception. Weighing. It is the accented step. The operator scans the label of the bag or drum before weighing: the software checks that it is the right material, from a released lot, in the recipe's quantity, and it records the link. A few seconds per weighing; without them, nothing can be found again. Production. A production order carries the recipe and its version, the line, the shift, the time.

The check. Measurements are entered on a tablet, at the station, at the moment they are taken. Packing. The finished lot is born here, with its expiry date: shelf life is the length of time that a commodity may be stored without becoming unfit for use, consumption, or sale. The label carries the lot and the date, printed from the software, see label printing. Shipping. Each pallet has its number and its lots; goods leave by date, the nearest first, as in traceability by lot. Without a network. On a line, the station must keep recording when Wi-Fi drops: see the offline application.

«A few seconds per weighing; without them, nothing can be found again.»
02

A doubtful lot: where did it go?

The figure follows a lot of material all the way to the customers.

Figure 3 · One lot of tomato concentrate that went into three production lots, fourteen pallets: six blocked in stock, eight at five customers. Constructed example.

Forward. A supplier reports a defect on a lot of concentrate. On one screen: that lot went into three production lots, that is fourteen pallets. Six are still in stock and are blocked in one gesture; eight are at five customers, with quantities and dates. A product recall is a request from a manufacturer to return a product after the discovery of safety issues: limiting it to eight pallets rather than a month of production makes all the difference. Backward. The reverse reading starts from a jar returned by a customer: its lot, then the materials, the packaging, the line, the shift, the measurements.

In both directions. Traceability is the ability to verify the history, location, or application of an item by means of documented recorded identification; in food, its decisive moment is when an issue of contamination arises and a recall is required. For process manufacturing, people speak of forward and backward lot traceability: those are the two readings of the figure. The drill. Traceability that has never been tried is not worth much. Regularly, you pick a lot at random and time it: how many minutes for the list of customers? It is the only real test, and it is done on a quiet day. After the plant. Temperature during transport is another proof, covered in the cold chain.

03

The mass balance: what goes in must come out

The figure weighs one lot, then compares six successive lots.

Figure 4 · One lot’s mass balance (912 kg of conforming product for 1,000 kg in) and the yield of six successive lots on the same line, from 93.1% to 89.6%. Fictitious quantities.

The principle. A mass balance applies conservation of mass: the mass that enters a system must either leave the system or accumulate within it. In the example, 1,000 kg of material go in; out come 912 kg of conforming product, 50 kg of loss planned by the recipe (water that evaporates, what stays in the tanks) and 22 kg of declared scrap. 16 kg are missing. What that gap can be. An approximate weighing, a scale out of adjustment, undeclared scrap, a material wetter than usual, a loss at a format change. The figure does not say which; it says there is something to look for.

The trend. One lot at 91.2% worries nobody. Six lots in a row on the same line, from 93.1% to 89.6%, tell another story: something is deteriorating, and you know where and since when. What a point is worth. On one tonne, one point of yield is ten kilos of paid-for material that do not become product. Each unit can work out what that weighs over its year. What to compare by. By line, by shift, by recipe, by material supplier: the same base, four readings. Yield then enters the cost of the finished product, lot by lot and not as an annual average.

«One lot at 91% says nothing. Six lots going down say where to look.»
04

Six questions on a crisis day

The figure compares six questions, with notebooks and then with linked lots.

Figure 5 · Six questions asked on the day of a complaint or a supplier alert. The middle column is the answer with notebooks; the right-hand one, with lots linked to one another.

The checks. Hazard analysis and critical control points is a systematic preventive approach to food safety. A critical control point is a point, step, or procedure in a food manufacturing process; monitoring activities are necessary to ensure that the process is under control at each one, and records document that monitoring. The software does not decide your critical points: it knows them, asks for the measurement at the right moment, flags a value outside the limit and blocks the lot. The sheet filled in later. A measurement entered on a tablet carries its time: the sheet is no longer filled in the next day.

Allergens. The most common food allergies are those to milk, egg, peanuts, tree nuts, fish, shellfish, soy, and wheat; cross-contact occurs when allergens are unintentionally transferred from one food item to another. The recipe carries its allergens; the production order knows what ran before on the line and asks for the planned cleaning. Blocking. A blocked lot is blocked everywhere at once: in stock, in picking, on the dock. The recipe version. A change of ingredient creates a version; each order keeps its own. The day a customer asks what a lot from March contained, the answer is not “the current recipe”.

05

Eight weeks, in the example

Eight weeks for one line and one product family, one of them a survey.

  • What the production lead receives: versioned recipes with their allergens; a link between each lot of material and each lot of product; a mass balance per production order; checks entered at the station and time-stamped; pallets tied to their customers; a timed recall drill.
  • What the plant no longer does: search notebooks for two days, call every customer of the month, fill in check sheets the next day, discover a fall in yield at stocktake, answer “the current recipe” to a question about an old lot.
  • What is measured: time to find a lot's customers; yield per lot, per line and per shift; unexplained gap in the mass balance; checks done on time; lots blocked and time to release; stock by expiry date.
  • What Symloop does: the survey in the plant, recipes and lots, the weighing and check screens, the labels, the mass balance, pallets and shipping, offline operation on the line, then the recall drill with you.
Figure 6 · Eight weeks in the example, for one line and one product family. The accented period is the first: reading the sheets the plant already fills in. The last milestone is a recall drill. Indicative durations of a constructed example.

The survey. One week in the plant: the recipes as they are applied, the weighing and check sheets, the labels, how lots are numbered today. One line first. You do not trace the whole plant at once: one line, one product family, from reception to shipping. The stations. A scanner and a screen at weighing, a tablet at the check, a label printer at packing: the equipment follows the gesture, not the other way round. The recall drill. The last milestone: a lot picked at random, and the stopwatch.

What remains afterwards. A genealogy per lot, a mass balance per order, time-stamped checks, pallets tied to their customers. Standards. Frameworks exist, such as the ISO 22000 family, on food safety management, one of whose standards, ISO 22005, covers food traceability; the software supplies the records, it replaces neither the approach nor your quality manager. Off the shelf or custom. Specialised software exists for the food industry; it fits when your process falls within its frame. Custom work is justified when the line has its particularities, or when what you already have must be connected. The durations are those of a constructed example.

Is there software for the food industry?
Yes. It must hold recipes, lots from raw material to finished product, production, quality checks and stock by expiry date. The point to check: does it link each lot of material to each lot of product, at the moment of weighing?
What is a food ERP?
Management software that adds to the usual functions, purchasing, stock, sales, what food manufacturing requires: recipes, lots, expiry dates, checks, traceability in both directions. The name matters less than the ability to link lots on the line.
How do you ensure lot traceability?
By giving a lot to each reception, scanning that lot at each weighing, and giving a lot to each production run and each pallet. The link taken at weighing lets you read in both directions: from material to customer, and from customer to material.
How do you quickly find a lot's customers?
If each shipped pallet carries its lots and its customer, the list comes out on one screen: pallets in stock to block, pallets delivered with dates and quantities. Without that, delivery notes have to be cross-checked by hand.
How do you calculate material yield?
Conforming product out, divided by material in, for each lot. Then take away the loss planned by the recipe and the declared scrap: what remains is a gap to explain. Follow it per line and per shift.
Why is my yield falling?
The causes to rule out: a line setting, a scale, a wetter material or one from another supplier, undeclared scrap, losses at format changes. Six lots compared on the same line say where to look.
How do you manage expiry dates?
The date is born at packing, with the lot. Stock then leaves by date, the nearest first, and the software flags what is approaching its date while there is still time to sell it.
Can paper check sheets be replaced?
Yes: measurements are entered on a tablet at the station, at the time they are taken. A value outside the limit triggers an alert and can block the lot. Paper remains possible as a fallback.
Does the software work without a connection on the line?
It has to. Weighing and check stations record locally and synchronise when the network returns: a line does not stop for a Wi-Fi cut.
How long does it take to equip a unit?
Eight weeks in this page's example, for one line and one product family, up to a recall drill. The other lines follow, one after another.
Tell us what you make, on how many lines, and how your lots are numbered today: we start with a week in the plant

Two days to find one lot, a falling yield, check sheets on paper, a recall that cannot be limited, or a unit in Algeria whose production you want to read from France

Symloop builds the link between your lots: recipes, scanned weighings, mass balance, checks at the station, pallets and customers. Describe your manufacturing to us, your materials, and the question you cannot answer in under an hour.