Short answer. Filling station software holds five things: the meter readings at every shift change, the till per shift, the tanks (morning dip, deliveries, gap), account customers and their vouchers, the shop and the services. Two comparisons do nearly all the work: the litres on the meters multiplied by the price, against what the shift hands over; and calculated stock, against dipped stock. Done every day, they give each gap a date and the name of a shift. Done at month end, they only give a total. Custom software is justified when the station has its own rules: company accounts, a shop, a car wash, several sites.
This page is for the manager of a filling station, the owner of several stations, and the founder based in France who owns or finances a station in Algeria and wants to read its gaps from afar. The definitions come from public sources: filling station, pump and meters, dipstick, shrinkage, fuel card, thermal expansion of petrol. The four-nozzle station, its readings, its volumes and its calendar are a constructed example; the example's prices per litre are rounded and are not a tariff. The page covers neither fuel prices, nor the rules of the trade, nor taxation, and quotes no hardware price.
From the tanker to the bank: six places where a litre is lost
The figure follows a litre from delivery to banking.
A station sells a product nobody sees. A filling station is a facility that sells fuel and engine lubricants for motor vehicles; many also provide a convenience store. Fuel is not counted on a shelf: it arrives by tanker, waits in an underground tank, leaves through a nozzle. Between the three, the only trace is a figure: the delivery note, the dip, the meter. Six places. At each step of the figure, the question is the same: does what is written match what went through? A notebook answers once a month. Software answers at every shift change.
Why the till is accented. It is the step where money changes hands several times a day. As long as the till is counted once, in the evening, the gap belongs to the whole day, and so to nobody. Counted at every shift change, it belongs to one shift. What this page does not cover. Fuel seen from a company that has vehicles and wants to know what they consume is another subject, covered in fleet management. Here, we stand on the side of the one who sells.
What station software must hold
The figure stacks the five layers, from the meters to the shop.
The meters first. A pump brings together a motor, a pumping unit, meters and valves; newer models turn the meter's movement into electrical pulses. Each nozzle therefore has a reading that only moves forward. Read at the start and the end of every shift, it gives the litres sold without anyone having to declare them. By hand or automatically. On a phone, the reading takes two minutes: a photo of the display, the figure entered, the time recorded. When the dispensers and their controller allow it, the reading can be taken directly; that is checked on site, model by model, before being promised.
Account customers. These are the companies that fill up all week and settle at the end of the month. Each visit leaves a voucher, and together they form a credit to follow like any customer credit, with a ceiling and a statement. A fuel card is a payment card used most commonly for petrol, diesel and other fuels at stations: the customer account is its in-house version. The shop and the services. Lubricants, goods, car wash: they have their own stock and their own till, kept like those of a convenience shop. Mixed with the fuel till, they make every gap unreadable.
Closing a shift: the meters against the till
The figure closes the morning shift of a four-nozzle station.
The calculation. The readings give 3,200 litres of petrol, 2,500 of diesel and 900 of LPG motor fuel. At the example prices, the shift owes 227,800 dinars. It hands over 171,300 dinars in cash, 18,400 in card payments and 33,500 in signed vouchers: 223,200. 4,600 dinars are missing, the equivalent of 100 litres of petrol. What changes. The gap is known at 2 pm, in front of the shift that leaves and the one that arrives. A voucher left in a pocket is found; a change error is recognised; a gap with no explanation is signed. The next day, it does not mix with another shift's.
Cases to plan for. A pump test poured back into the tank, a price change during a shift, an expense paid from the till: each has its line, otherwise it becomes a gap. Payments. What is paid by card or by QR code is reconciled with the bank statement, as for a shop's till. Who was on shift. Closing assumes knowing who was working: the staff schedule and the till speak of the same people. Without a network. The reading is saved on the phone even with no connection and synchronises afterwards: a station does not stop when the network drops.
«Counted in the evening, the gap belongs to the day. Counted at shift change, it belongs to one shift.»
The tank: calculated stock against dipped stock
The figure follows one petrol tank over eight mornings, with a delivery on Tuesday.
Two figures for one stock. Book stock starts from the previous day's stock, adds deliveries, takes away the litres that went through the meters. Dipped stock is read in the tank: a dipstick is used to measure the amount of fuel remaining in a tank. The gap between the two is shrinkage: shrinkage occurs when a retailer has fewer items in stock than were expected by the inventory list. In the example. Over eight mornings, the cumulative gap reaches 410 litres for 32,000 sold. But it did not arrive all at once: 20 to 30 litres a day, and 260 litres on delivery day.
The step and the slope. A step on a delivery day is controlled at unloading: dip before, dip after, compare with the note. A steady slope is to be checked: a meter that delivers a little more than it counts, or a tank to have inspected. In many jurisdictions, regular required inspections are conducted to ensure the accuracy of pumps, and there are tank monitoring systems capable of detecting small leaks. Temperature. Petrol expands and contracts significantly: according to the reference article on pumps, ten volumes measured at 15 °C become about 10.15 at 29 °C. Part of a delivery gap can therefore come from there: one more reason to follow it delivery after delivery, like any stock kept by movements.
«A tank dipped every morning says which day the gap arrived.»
Six gaps, and what to check first
The figure gives, for each gap, the first cause to rule out and the screen that settles it.
A gap does not accuse, it points. Each line of the figure starts with the most ordinary cause: a forgotten voucher, a wrong entry, a delivery measured warm. The software names nobody; it narrows the field to one shift, one tank, one nozzle, one day. Account customers. A disputed statement is settled voucher by voucher: the number, the vehicle, the litres, the time, the shift, the driver's signature. The ceiling stops an account before the balance becomes a problem, and the month-end statement comes out with no retyping.
What the manager reads in the morning. Four lines: the gap of each of yesterday's shifts, the gap of each tank, litres per product compared with the same day of the previous week, the balance of the accounts. It is a short dashboard, readable on a phone, in Algiers as in Lyon. Several stations. The same screens, one station per line: the one whose gap stands out is seen without calling anyone. Days of stock. Dipped stock divided by average sales gives the days left per tank: the order goes out before the tank runs dry, not after.
Six weeks, in the example
Six weeks for a four-nozzle station with a shop, the first of them to read the notebooks.
- What the manager receives: a closing per shift with its gap; the morning dip and the gap per tank; every delivery checked before and after unloading; customer accounts with vouchers, ceilings and statements; the shop stock; a morning board on their phone.
- What the station no longer does: discover the gap at month end, look for a voucher in a drawer, recalculate the tank by hand, wait for a customer to dispute before finding a visit, run dry for not having seen the tank go down.
- What is measured: till gap per shift, in dinars and in litres; tank gap per product, per day and per delivery; litres per nozzle and per hour; balance and lateness of accounts; days of stock per tank.
- What Symloop does: the survey of what exists, the reading and closing application, the follow-up of tanks and deliveries, customer accounts, the shop till, the manager's board, automatic meter reading when the installation allows it, then the parallel period with the shifts.
Start with the notebooks. The first week is spent reading what the station already notes: till notebook, dip notebook, voucher book. What exists is taken over as it is; what is missing is added. The order. Meters and shifts first, because that is where money passes every day; tanks next; customer accounts once the first two are running. In parallel. For two weeks, notebook and application are kept together: it is the comparison that gives the shifts confidence, and that shows what the notebook did not see.
What remains afterwards. A closing that fits on one screen, signed by the shift that leaves and the one that arrives. A dip that takes the time to lower the stick and enter a figure. A statement per company, produced with no retyping. Off the shelf or custom. If existing software covers your shifts, your tanks and your accounts, take it. Custom work is justified when your rules do not fit its boxes: company vouchers, a shop, a car wash, several sites. The durations are those of a constructed example: a station with no shop and no customer accounts takes less; several stations, more.
- Is there management software for a filling station?
- Yes. It must hold five things: meter readings per shift, the till per shift, tanks and deliveries, account customers, the shop. Check that it compares the meters with the till every day, and calculated stock with dipped stock: those are the two screens that matter.
- How do you control the till of a petrol station?
- At every shift change: read each nozzle's meter, multiply the litres by the price, compare with what the shift hands over in cash, by card and in vouchers. The gap is known at once, in the name of one shift, instead of dissolving into the month.
- How do you calculate the tank gap?
- Yesterday's stock, plus deliveries, minus the litres that went through the meters: that is book stock. Compare it every morning with dipped stock. Follow the gap day by day: a steady slope and a step on a delivery day do not have the same cause.
- Why does the tank hold less than the calculation?
- The causes to rule out, in order: a delivery shorter than the note, a meter that delivers a little more than it counts, a dipping error, temperature, more rarely a leak. Only daily follow-up says which one is at play.
- How do you manage account customers' vouchers?
- One numbered voucher per visit, with the vehicle, the litres, the time, the shift and the signature. A ceiling per company, a statement at month end. In the shift's closing, the voucher counts as a payment: it can no longer be lost without leaving a gap.
- Can the software be connected to the pumps?
- It depends on the dispensers installed and their controller: some give access to their meters, others do not. It is checked on site. Without a link, the reading is done by hand on a phone, in two minutes per shift.
- Does the software work without an Internet connection?
- It has to: a station does not stop when the network drops. Readings, closings and vouchers are saved on the device and synchronise when the connection returns.
- Can several stations be followed?
- Yes: the same screens, one station per line. Every morning the owner sees the till gap and the tank gap of each site, and spots the one that stands out without calling anyone.
- Off-the-shelf or custom software?
- If existing software covers your shifts, your tanks and your customer accounts, take it. Custom work is justified when your rules do not fit: company vouchers, a shop, a car wash, several sites, or a link with your other tools.
- How long does it take to equip a station?
- Six weeks in this page's example, for four nozzles, three shifts, customer accounts and a shop, two of them in parallel with the notebooks. A simpler station takes less.