Short answer. Poultry farm software holds four things. The daily log: deaths, feed given, water, temperature, entered on the phone in the house. Weighings: the average weight each week, compared with the target. The feed conversion ratio: feed given divided by weight produced, calculated every week. The cost per kilo: chick, feed and other costs set against live weight, before the sale. In this page's example, for the same flock, a ratio of 2.00 instead of 1.80 takes the margin from 666,000 to 324,000 dinars.
This page is for those who run a broiler farm, from one house to several sites, and for integrators who follow contract growers, in Algeria or from France for an investment project. The definitions come from public sources: broiler, poultry farming, feed conversion ratio, mortality rate, animal feed, biosecurity, traceability. The flock, its mortality, its weights and its prices are a constructed example, with fictitious prices. The page gives no veterinary advice and no feed formulation; it covers neither approvals and sanitary rules, nor agricultural subsidies and tax, and quotes no hardware price.
A flock, in six steps
The figure follows a flock in six steps.
The trade. Poultry farming is the form of animal husbandry that raises domesticated birds to produce meat or eggs. A broiler is a chicken bred and raised specifically for meat production; most commercial broilers reach slaughter weight between four and six weeks of age. So everything is decided in six weeks, and the next flock does not correct the previous one. Placement. Number of chicks, average weight, origin, date: that is point zero of every calculation. Starting. In the first week, mortality is watched closely.
Growth. That is the accented step: one weighing a week on a sample, and the feed given. Finishing and removal. The target weight and the planned date are read off the curve; at removal, the weight sold, the price and the buyer close the flock. The gap. Between two flocks the house is cleaned; it is also the time for the results. Biosecurity. It refers to measures aimed at preventing the introduction or spread of harmful organisms; the software decides none of them, it records what was done, and when.
What is inside poultry farm software
The figure stacks five layers; the second feeds all the others.
Flocks. A flock belongs to a house and carries its dates. The daily log. That is the accented layer: four figures, every morning. The notebook on the door already holds them; what is missing is that they be added up, compared, and seen by someone other than the person writing them. Without a network. A poultry house rarely has coverage: entry is done offline and synchronises afterwards, see the offline application.
Stocks. Feed is frequently the main cost of raising animals. Each delivery goes into a silo; each distribution comes out of it; the gap between the silo and the log shows. Orders follow real consumption, see replenishment. Temperature. Probes can feed the log and raise alerts, as in the cold chain. Results. Cost per kilo and margin per flock, read on a dashboard.
Mortality, seen the same day
The figure shows each day's deaths, over a forty-two-day flock.
The rate. A mortality rate is a measure of the number of deaths in a particular population. In the example, 500 deaths out of 10,000 chicks, that is 5%. The total says little: 190 of those deaths fall within seven days, from day 18 to day 24. The threshold. The software compares each day with twice the average of the seven previous days. On day 19, 18 deaths against an average of 7: the alert goes out, two days before the peak of 50.
What the alert does. It explains nothing: it warns the person who decides, through the channel that arrives, see notifications, and leaves understanding to the vet. Other signals. Water consumption that drops, feed that is not eaten, weight falling away from the target: each has its threshold, set with your vet. In the notebook. The same figures exist, but nobody averages the last seven days at six in the morning. What is measured. Mortality per day, per week and cumulative; per house; per origin of the chicks.
«The alert explains nothing: it brings the vet in two days earlier.»
The feed conversion ratio, and the cost per kilo
The figure gives the cost of a live kilo for the same flock, with two ratios.
The ratio. The feed conversion ratio measures how efficiently an animal turns feed into output: it is the mass of feed divided by the mass produced. Published values for broilers range, depending on source and year, from about 1.6 to 2.0 kilos of feed per kilo of live weight. In the example. 22,800 kg sold. With 41,040 kg of feed, the ratio is 1.80; with 45,600 kg, it is 2.00.
The cost per kilo. Fictitious prices: 90 dinars per chick, 75 dinars per kilo of feed, 600,000 dinars of other costs. At 1.80, the live kilo costs 200.8 dinars: 39.5 of chick, 135.0 of feed, 26.3 of other costs. At 2.00, it costs 215.8 dinars. Sold at 230 dinars a kilo, the flock leaves 666,000 dinars in the first case, 324,000 in the second. What that says. Two tenths of ratio, 4,560 kg of feed, half the margin. Every week. The software calculates the ratio at each weighing; a ratio that drifts in week four is seen in week four. The costing method is the one described in the cost of a finished product.
«Two tenths of ratio, 4,560 kg of feed, half the margin.»
Six weeks, between two flocks
Six weeks in the example, timed on a gap between two flocks.
Scoping. One week: your houses, your weight targets by age, your chick and feed suppliers, and your current notebook, whose columns are kept. Entry. It has to fit in one minute, with large digits, in Arabic or in French: the person in the house does it, not the office. Starting. With a new flock, on placement day: a flock started in a notebook ends in a notebook.
Weighings. A sample weighed each week is enough; a connected scale avoids retyping, without being essential. Alerts. They are tuned after two or three flocks, once the software knows your usual figures. What the software does not do. It does not treat birds, does not formulate feed and replaces neither the vet nor the technician: it gives them clean figures, the same day. The durations are those of a constructed example.
From one house to an integrated chain
The figure gives five situations, and what the software adds to each.
- What you receive: the daily log on the phone, offline; weighings and the curve against target; the feed conversion ratio every week; feed stocks per silo; alerts; cost per kilo and margin per flock; comparison of houses.
- What the farm avoids: the flock whose loss is discovered after the sale, mortality reported three days too late, feed going out uncounted, the ratio calculated once a year, the notebook nobody rereads.
- What is measured: mortality per day and cumulative; average weight per week; feed conversion ratio; feed consumed per bird; cost per live kilo; margin per flock; gap between houses.
- What Symloop does: scoping your houses and your targets, the entry application, weighings and the ratio, stocks, alerts, results per flock, accounts for contract growers, in Arabic and in French.
One house. The notebook is enough for noting; the software brings the calculations and the alert. Several houses. Comparison becomes the main tool: same feed, same origin, two different ratios, why? Several sites. Management sees every house each morning, without calling anyone.
The chain. When the feed mill, the hatchery or the abattoir belong to the same group, batches are followed from one link to the next: traceability is the recording of all movement of a product, as in food manufacturing software. Contract growers. An integrator that supplies chicks and feed keeps an account per grower: what was entrusted, what was delivered, the settlement; the mechanism is that of entrusted materials, described in subcontracting. Ready-made or custom. Farm software exists, some of it free, and suits a single house. Custom work is justified for several sites, an integrated chain, contract growers, or a link with your sales management.
- How do you run a broiler chicken farm?
- By keeping a log per flock, noting deaths and feed every morning, weighing every week, and calculating the feed conversion ratio and the cost per kilo while the flock is growing, not after the sale.
- What software for a poultry farm?
- Software that holds the flocks, the daily log on the phone, weighings, feed stocks and results per flock, and that works without a network in the house.
- How do you calculate the feed conversion ratio?
- By dividing the weight of feed given by the live weight produced. In the example: 41,040 kg of feed for 22,800 kg of chicken, that is 1.80.
- How do you calculate the cost of a kilo of chicken?
- By adding up the chick, the feed and the flock's other costs, then dividing by the live weight sold. In the example, at fictitious prices: 200.8 dinars a kilo.
- What mortality rate is normal?
- It depends on the strain, the season and the house, and is something to discuss with your vet. The software sets no norm: it compares each day with your seven previous days and with your past flocks.
- How do you detect a health problem earlier?
- With daily entry and an alert threshold: in the example, the alert goes out on day 19, two days before the peak. The cause is a matter for the vet.
- Is the internet needed in the house?
- No. Entry is done offline on the phone and synchronises as soon as it finds a network.
- Who enters the figures?
- The person who looks after the house, in one minute, with four figures. If entry takes more, it will not be done every day.
- Can several houses or several flocks be compared?
- Yes, and it is the main benefit from the second house on: same feed, same origin, different ratios show where to look.
- Does the software suit an integrator?
- Yes: an account per contract grower, with the chicks and feed entrusted, deliveries and the settlement, and the same flock figures for each.