Short answer. To share a printer between several computers, plug it into the network and not into one computer: by cable to the switch or the router, it no longer depends on a computer being on. Then give it an address that does not change, reserved in the router. Install it on every computer with the same driver, from a single place. Send scans to a shared folder. Name a person in charge of toner, the counter and updates. An “offline” printer has three common causes, to check in this order: its address has changed, the computer sharing it is off, a job in error is blocking the queue.
This page is for the manager of an office, a practice, a shop or a workshop of five to fifty computers where printing stops without warning, and for the founder based in France whose team in Algeria cannot wait for them to restart a printer. The definitions come from public sources: print server, driver, print queue, automatic address assignment, address reservation, driverless printing, firmware. The six-computer office, its addresses and its calendar are a constructed example. No model and no hardware price here: the question is the set-up, not the machine.
Five layers, and the one that breaks most often
The figure stacks what it takes for a page to come out, from the cable to upkeep.
A printer is not an accessory of one computer. A multifunction machine brings several devices together in one: printing, copying, scanning. For a page to come out, five things must hold at the same time. The driver is the software which, on the computer, converts the data to be printed into a format the printer can understand: a driver that is not the model's own gives pages of strange characters. The queue keeps documents at the speed of the computer, then hands them to the printer at its own: it is what lets six people print at the same time, and it is what gets stuck when a job goes into error.
Why the address is accented. The three layers after it rest on it: the driver and the queue send pages to an address. If it changes, everything looks broken although nothing is. It is also the layer nobody looks at, because it was set once, by chance, on installation day. What this page does not cover. Producing an invoice, a receipt or a label from a piece of software is another subject, covered in printing from your application. Here, it is about the office printer, the one everybody uses and nobody looks after.
Plugged into one computer, or into the network
The figure shows the two set-ups, with the same six computers.
Sharing through one computer. The printer is connected by a USB cable to the reception computer, which shares it with the others: file-sharing protocols also serve to share printers. It works as long as that computer is on. It only has to switch off, go to sleep, restart for an update, or its user to go on leave, and the five others see the printer “offline”. Without anyone deciding it, the reception computer has become a server. Directly on the network. An office printer generally has its own network port. Connected to the switch, it receives an address and each computer talks to it with nothing in between.
Cable or Wi-Fi. Cable for preference: a printer does not move, and Wi-Fi adds one more cause of failure, described in Wi-Fi that drops at the office. If a socket is missing near the machine, that is a matter of network cabling, not of the printer. Only two computers. The answer is the same: if the printer has a network port or Wi-Fi, connect it to the router and install it on both computers. Sharing through one computer remains possible when it only has a USB port, knowing what it implies: the first computer must stay on for the second to print.
«A printer shared by one computer breaks down every time that computer switches off.»
The address that changes
The figure follows the same printer over one working week, with two settings.
Who hands out the addresses. On an office network, it is the router that automatically assigns an address to each device. These addresses are lent for a period: the router takes back those that are not renewed and gives them to others. An address assigned at each restart is called dynamic; a permanent one is called static. In the example. For three days, the printer answers at the address ending in 37, and that is the address the computers recorded on installation day. On Tuesday evening, the power is cut. On Wednesday, the router gives it another one, ending in 52. The computers still write to the old one: “offline”. Nobody touched anything.
Reserve, rather than set by hand. A reservation consists in mapping, in the router, the printer's unique identifier to an address: each time it asks for an address, it receives the same one. It is also called fixed address allocation. The advantage over a setting made on the printer: everything is recorded in one place, and the machine stays on automatic. If the address is set by hand on the printer, it must sit outside the range the router hands out, otherwise the router may lend it to another device. An address plan. Keep a small range for printers, write the address on a label stuck on the machine and in the fleet inventory.
Six steps to put printing back on its feet
The figure gives the order of the moves; the second is the one that removes the most faults.
Inventory, plug in, reserve. It starts with a list: each machine, how it is connected, its address, the driver installed on each computer, the faults of the month. That list says what to move. Deploy the same driver. One driver per model, always the same, installed from one point: a shared folder where it is kept, or a print server. A print server connects printers to computers over the network: it accepts the jobs, queues them and sends them to the right printer. Driverless. Since 2013, a common baseline, IPP Everywhere, allows so-called driverless printing on the machines that support it: useful for phones and for visiting computers.
Scan to a folder. The USB key disappears when the multifunction machine drops scans into a shared folder, one per department, as in file sharing. Give the machine an account kept for it: if it uses an employee's, scanning stops the day that person changes their password. A dated file name and a planned place avoid the catch-all folder, see archiving documents. Maintain. One cartridge in reserve, the page counter read every month, updates, and above all a name: a printer that everybody uses and nobody is in charge of always ends up stopping on a Sunday morning.
Six faults, and the cause to check first
The figure gives, for each fault, the first cause to rule out and the move.
One computer, or all of them? That is the first question, before any move. If only one computer cannot print, the problem is on that computer: wrong default printer, different driver. If nobody can print, it is on the side of the machine or the network. The order for an “offline”. Is the printer on, with no message on its screen? What address does it have: most office printers can print a configuration page from their panel. Is it the address the computer uses? The queue. A job in error holds back all the next ones: remove that one, do not empty everything, and do not send the same document ten times.
A printer is a computer. It has firmware, the software that controls the hardware at the lowest level, an administration page and a factory password to change, like every device described in securing the company network. The computers count too: at the end of June 2021, a critical vulnerability, PrintNightmare, was discovered in the Windows service that manages the print queue. One more reason to keep computers up to date. Held printing. The job waits and only comes out when its author releases it in front of the machine: useful for a contract or an offer nobody else should pick up. Double-sided. Set by default, it prints automatically on both sides of the sheet.
«Before reinstalling a driver, one question: one computer, or all of them?»
Ten working days, in the example
Ten working days for an office of about fifteen computers, two of them for the inventory.
- What the manager receives: the inventory of printers and how they are connected; each machine on the network with a reserved and recorded address; one driver per model, installed the same way everywhere; scanning to one folder per department; a one-page sheet near each machine; a named person.
- What the company no longer does: wait for the reception computer to be on in order to print, reinstall a driver found on the Internet, empty the whole queue for one stuck job, carry a USB key around for a scan, find out there is no toner left on the day a file is due.
- What is measured: number of printing faults per month, before and after; share of printers plugged into the network with a reserved address; number of different drivers for one model; pages per month from the counter; time to connect a new computer.
- What Symloop does: the inventory, moving the printers onto the network, the address plan and the reservations, choosing and deploying the drivers, scanning to shared folders, the security settings, the sheet per machine, then monthly follow-up with the rest of the fleet.
Without stopping the office. The work is done machine by machine: a printer is moved onto the network, its address reserved, then the computers that use it are reinstalled with the chosen driver. The old installation is removed from a computer only once the new one has been tried. The periods overlap because drivers can be prepared while addresses are being reserved. The check. On the last day, every computer prints a page and scans a sheet to its folder: what has not been tried is not counted as done.
What remains afterwards. A one-page sheet, displayed near each machine: its name, its address, how to remove a stuck job, who to call. A new computer is then connected in a few minutes, without hunting for a driver on the Internet. The follow-up. Printers enter the monthly statement just like computers and the network: counter, toner level, firmware version, faults of the month. It is one line of a managed IT contract, not a separate subject. The durations are those of a constructed example: an office of five computers with a single printer takes far less.
- How do you share a printer on a network?
- Plug it into the network, by cable to the switch or the router, rather than into one computer. Reserve an address for it in the router, then install it on every computer with the same driver. Each computer then talks to it directly, without depending on another computer.
- How do you share a printer between two computers?
- If the printer has a network port or Wi-Fi, connect it to the router and install it on both computers: neither depends on the other. If it only has a USB port, one computer can share it with the second, but it must stay on for the other to print.
- Why is my printer “offline”?
- Three common causes, in this order: its address has changed, often after a power cut; the computer sharing it is off or asleep; a job in error is blocking the queue. A reserved address in the router removes the first, plugging it into the network the second.
- The printer has stopped working: where do I start?
- With a question: one computer, or all of them? If one, look at that computer. If all, check that the printer is on and shows no error message, print its configuration page to read its address, then compare it with the one the computers use.
- Does a printer need a static IP address?
- Yes: an address that does not change. The simplest is to reserve it in the router, which then always gives that machine the same address. If you set it by hand on the printer, choose it outside the range handed out automatically.
- Documents stay stuck in the print queue: what should I do?
- Open the queue and remove the first job, the one in error: it holds back the next ones. No need to empty everything or send the document ten times. If it comes back often, look for the cause: changed address, unsuitable driver, very heavy file.
- Do we need a print server?
- Not for an office of a few computers and one printer: each computer can talk to it directly. A central point becomes useful with several printers and many computers, provided it runs on a machine that is always on: drivers are installed from one place and queues are seen in one place. It is a rule of thumb, not a rule.
- Cable or Wi-Fi for the office printer?
- Cable when possible: a printer does not move, and a wired link depends neither on Wi-Fi coverage nor on its drops. Wi-Fi remains a solution when no network socket is available near the machine.
- How do you scan to a shared folder?
- Create one folder per department, give the multifunction machine an account kept for it that has the right to write there, then save that folder as a destination on the machine. Avoid an employee's account: scanning would stop at their next password change.
- How long does it take to put printing in order?
- Ten working days in this page's example, for an office of about fifteen computers: inventory, move onto the network, addresses, drivers, scanning, security, check. A small office with a single printer takes far less.